What Causes Condensation in Winter? UK Guide

It is one of the most familiar sights of a British winter: you wake up, pull back the curtains, and the bedroom window is running with water. Droplets cover the glass, the sill is wet, and by the afternoon there may be a dark patch of mould growing in the corner. It is condensation, and it is the most common form of damp in rented homes in the UK. It gets worse in winter, it can damage your home and your health, and it is largely preventable once you understand what causes it.
Condensation is not a leak, and it is not rising damp. It is water that was already in the air inside your home, turning back into liquid when it meets a cold surface. Every home produces moisture, every day, from cooking, showering, washing and even breathing. In cold weather, that moisture has nowhere to go, so it settles on the coldest surfaces it can find. Windows are usually first, but it also appears on cold walls, in corners, behind wardrobes and behind curtains.
What is condensation?
There is always some moisture in the air, even if you cannot see it. If air gets cold, it cannot hold all the moisture produced by everyday activities, and some of this moisture appears as tiny droplets of water, most noticeable on windows on a cold morning. That is condensation. It can also be seen on mirrors when you have a bath or shower, and on cold surfaces such as tiles or cold walls. That is the definition used by councils across the UK, and it explains why the problem is seasonal: condensation occurs in cold weather, even when the weather is dry.
The science is simple. Warm air can hold more water vapour than cold air. When warm, moist air from a kitchen or bathroom reaches a cold window, the air next to the glass cools, and it can no longer hold all its moisture. The excess appears as droplets on the glass. The colder the surface, and the more moisture in the air, the heavier the condensation. Single-glazed windows are the worst affected, because the glass is coldest, but even double glazing will mist up if the room is very humid and the night is very cold.
Why winter makes it worse
Winter brings together all the conditions that favour condensation. The outside temperature falls, so windows and external walls get colder. Homes are heated, so the air inside is warm and can hold more moisture. And windows stay shut, so the moist air cannot escape. Cooking a meal, taking a shower or drying a load of washing can add litres of water to the air in a single day, and in a sealed, heated home that water has to go somewhere.
Energy costs make the problem worse. Households worried about heating bills may keep the heating low or off, which leaves walls and windows colder, so condensation forms more readily. That is why councils warn that more homes may be at risk of mould and damp this winter as people cut back on heating. Keeping a home at a steady, moderate temperature is one of the most effective ways to reduce condensation, because warm walls and windows give the moisture nowhere to settle.
Where to look for it
Condensation appears in places where there is little movement of air. Look for it on or near windows, in corners, often behind curtains, and in or behind wardrobes and cupboards. It forms on cold surfaces and in still spots, which is why it is often worst in bedrooms, where the heating may be low overnight and the curtains stay closed, and in bathrooms and kitchens, where the most moisture is produced. Black spots of mould often follow in the same places, especially at the top corners of external walls and around window frames.
One useful test separates condensation from other kinds of damp. Condensation does not leave a tidemark around its edges on walls. If there is a tidemark, the dampness might have another cause, such as water leaking in from a plumbing fault, loose roof tiles or rising damp. Those causes need repairs. Condensation needs a change in how moisture is produced, heated and ventilated, which is a different job, and one that the people living in the home can often do themselves.
What damage can it do?
Left alone, condensation is more than an annoyance. Dampness caused by excessive condensation can lead to mould growth on walls and furniture, mildew on clothes and other fabrics, and the rotting of wooden window frames. Mould spreads as dark spots and patches, and it can stain paint and wallpaper, damage plaster and ruin soft furnishings. Wooden frames that stay wet will eventually rot, and the cost of replacing them is far higher than the cost of preventing the damp in the first place.
The health effects matter more. Damp, humid conditions provide an environment in which house dust mites can easily multiply, and the presence of mould and dust mites can make existing respiratory conditions such as asthma and bronchitis worse. Children, older people and anyone with a chest condition are most at risk. Mould spores in the air can irritate eyes, noses and throats, and can trigger coughing and wheezing. That is why councils treat persistent damp and mould as a health issue, not just a cosmetic one, and why it should not be ignored.
How to cut condensation day to day
The first step is the simplest: dry your windows and windowsills every morning, as well as surfaces in the kitchen or bathroom that have become wet. Wring out the cloth rather than drying it on a radiator, which would only put the moisture back into the air. Condensation channels and sponge strips, available at DIY shops, can be fitted to windows to collect the water and stop it running down onto frames and sills.
The second step is to reduce the moisture you produce. Keep the door closed while cooking or washing so that the excess moisture does not spread around the whole house, use the extractor fan or open a window to let the steam escape, and use lids on saucepans to contain the steam. When filling a bath, running the cold water first and then adding the hot reduces the steam by up to 90 per cent. Avoid drying wet clothes on radiators, and keep the space around radiators clear so warm air can circulate properly. If you use a tumble dryer, make sure it is properly vented to the outside.
The third step is ventilation. Open window vents if you have them, and leave a window open for a short while after cooking or showering, then close it and leave the door ajar so the room can slowly warm up again without a rush of cold air flooding the rest of the property. Move furniture slightly away from external walls to improve air circulation, and do not push wardrobes tight against a cold wall. These small changes, done every day, make a real difference over a winter.
Heating and ventilation: getting the balance right
Heating and ventilation work together, and getting the balance wrong is what causes most condensation. Heating alone, with no ventilation, leaves moist air trapped inside. Ventilation alone, with no heating, leaves surfaces cold enough for the moisture to settle on. The aim is a home that is warm enough that its walls and windows are not cold, and ventilated enough that moist air can escape.
Councils advise keeping the thermostat at a minimum of 15C in very cold weather, not only to reduce condensation but also to protect pipework from freezing. A steady temperature is better than heating in short, hot bursts, because it keeps the fabric of the building warm through the night, when condensation is worst. If your home has an extractor fan in the bathroom or kitchen, use it every time you cook or shower, and consider having one installed if there is not one already. In rooms that generate a lot of moisture, an extractor fan is one of the most effective single measures you can take.
What to do about mould that is already there
If mould has already appeared, it needs to be dealt with before it spreads. First treat the mould already in your home, then deal with the basic problem of condensation to stop it reappearing. To kill and remove mould, wipe down or spray walls and window frames with a fungicidal wash that carries a Health and Safety Executive approval number, and follow the manufacturer's instructions precisely. Dry-clean mildewed clothes, and shampoo carpets.
Do not try to remove mould by brushing it or vacuum cleaning it, because disturbing it can increase the risk of respiratory problems. After treatment, redecorate using a good quality fungicidal paint and a fungicidal resistant wallpaper paste to help prevent it recurring. The effect of fungicidal or anti-condensation paint is destroyed if it is covered with ordinary paint or wallpaper, so the fungicidal layer must stay on top. Remember that the only lasting cure for severe mould is to get rid of the condensation that causes it. Treating the mould without fixing the moisture is like mopping a floor while the tap is still running.
When to tell your landlord
Tenants should not have to live with persistent damp and mould. Condensation can be caused by a tenant not ventilating or heating a home properly, but it can also be caused by poor insulation or faulty heating and ventilation systems, which are the responsibility of the landlord. If you have followed the steps above and the problem continues, or if there is a structural cause such as a leaking roof or a broken extractor fan, report it to your landlord in writing and keep a record.
Social landlords have legal duties to deal with damp and mould, and the rules were tightened under Awaab's Law, which sets time limits for landlords to act on hazards in social housing. Private tenants can report unresolved damp to their local council, which can inspect the property and require the landlord to act. If you are unsure whether your damp is condensation or something else, your council's housing or environmental health team can advise, and many councils publish their own condensation guides online. The key point is to act early: a damp patch caught in November is a small job, while the same patch left until spring can mean rotted frames, ruined plaster and a much bigger bill.